Subsection 5.6
5.6 Grid Rivals
Notice: Note: Docs are currently being updated for v1.45.0.
Created Last edited
Grid Rivals is a members-only competition. Only drivers on the official Grid Rivals member list can turn it on in TiRST. For more information, or to find out how to take part, visit the Grid Rivals website at rankupgamers.com/gridrivals.
Grid Rivals is a team competition run in iRacing's official races. TiRST tracks it for you and shows your viewers who's racing whom, how the teams are doing during the race and who came out on top. Set it up on ⧉ Overlays → Grid Rivals in the control panel. Each panel on that page has its own section below.
What Grid Rivals is
Grid Rivals is a championship between two streaming communities. Each team has up to 20 iRacing drivers, led by a streamer and a captain, and the teams compete on their results in iRacing's official races. The aim is to encourage more people to race officials and to create friendly rivalry between the two communities.
The teams
- Team Demps (green): streamer Demps151, captain Richard Dempsey3.
- Team Malone (red): streamer MattMalone, captain Matt Malone.
The full rosters are on the Grid Rivals website and on the Grid Rivals page in TiRST.
How the competition works
- Every official race a team member runs earns their iRacing championship points.
- Those points are multiplied by the race length: race minutes ÷ 30, up to 6 times. A 60-minute race counts double.
- A driver's score is the total of their adjusted points, and a team's score is the total of its drivers' scores. There's no limit on how many races count.
- Each team has a reserve pool. At the start of week 6, each team's lowest-ranked drivers swap with its reserves. Drivers who drop out keep the points they've earned, and reserves who come in score from week 6 on.
The Grid Rivals website has the live standings, past seasons and the full rules.
What TiRST does
TiRST doesn't keep the championship score. Its job is to make Grid Rivals visible on your stream. When drafted drivers are in the same official race as you (or a special event), it shows who you're up against at the start, how the rivalry is going mid-race, and how everyone did at the finish. Overtakes and jabs involving drafted drivers get a TEAMMATE or RIVAL badge, and captains get a 👑 crown.
Drivers are matched by their iRacing name, ignoring upper and lower case, accents and extra spaces. Digits count, so "John Smith2" isn't "John Smith".
The Grid Rivals overlays
Grid Rivals adds its own overlay for members: Grid Rivals boards at http://localhost:8767/gridrivals. Add it to OBS as a Browser Source at 1920 × 1080. Its address appears on the Dashboard and on the Grid Rivals page once you're a member.
What appears during a Grid Rivals race:
- Matchups board (Grid Rivals overlay): before the race, on the grid or at the green flag. Each team is a column listing its drafted drivers in the race with their starting positions.
- Captains' duel: when both captains are in the same race, every board starts with them head to head. It shows their photos, names, car numbers, positions and who's ahead.
- Status board (Grid Rivals overlay): at half distance, and every 30 minutes in long races. It shows each drafted driver's start and current position, and your places gained or lost against the rivals (green when you're ahead, red when you're behind).
- TEAMMATE and RIVAL banners (Celebrations & jabs overlay): when you pass or are passed by a drafted driver, the overtake or jab gets a badge and a ribbon such as "RIVAL DOWN!", "A RIVAL GOT YOU" or "RIVAL CAPTAIN DOWN!".
- Results board (Grid Rivals overlay): when you finish, it shows each drafted driver's start → finish and places gained. Drivers still racing are marked RUNNING. The board updates once iRacing makes the results official.
- Your race celebration also shows your places gained and lost against the other team.
On your own screen, the Streamer overlay (/streamer) also shows the matchups board before the start and the results board after the finish, so you can see them while you drive. If you're a captain, your photo appears on your own celebration and jab cards in Grid Rivals races. The pre-race summary can also highlight Grid Rivals drivers in its driver list.
Boards, celebrations and banners take turns on screen, so they never overlap.
Member check
The bar at the top of the page says whether you can use Grid Rivals:
- ✓ Your name is on a team: for example "Matt Malone is on Team Malone (captain 👑). You can enable Grid Rivals."
- 🔒 Members only: your iRacing name isn't on the member list, so the rest of the page is locked.
- Start iRacing once: TiRST doesn't know your iRacing name yet.
- The list couldn't be downloaded: check your internet connection.
Click Check again to download the list again, for example after you've been added to a team.
Enable Grid Rivals
Enable Grid Rivals turns the feature on. It's off by default, and only members can tick it. Grid Rivals is active in official races and special events.
- Competition: the name of the current competition, from the member list.
- My team: Automatic (by my name), the default, finds your team from your iRacing name. You can also pick Team Demps or Team Malone yourself. Your team decides who counts as a TEAMMATE and who's a RIVAL.
- Board position from the top: where the boards sit on the Grid Rivals overlay, in pixels. The default is 300.
- Always show overtakes and jabs involving drafted drivers: TEAMMATE and RIVAL banners always show, even when the How often settings for overtakes or jabs would skip them. On by default.
Try it
The preview buttons play samples on the Grid Rivals overlay and the Celebrations & jabs overlay:
- Matchups board, Status board and Results board.
- Show this race's matchups: shows the real matchups board for the race you're in again, for example if you missed it.
- Overtake a rival and Overtake a teammate.
- Passed by a rival and Passed by a teammate.
Under Overlay is the Grid Rivals overlay's address, http://localhost:8767/gridrivals, with a Copy button and a live preview.
Member list
This panel shows the competition name, the number of drivers and when the list was last loaded. TiRST downloads the official Grid Rivals list from tirst.me every time it starts, so the teams are always up to date and there's nothing to set up yourself. Only drivers on this list can enable Grid Rivals.
Timing
At the start
- Show matchups: On the grid when iRacing publishes the grid (the default), or At the green flag.
- Wait before showing matchups: from 0 to 300 seconds, default 5. This gives everything else time to load when you join a session.
- Matchups on screen for: from 5 to 120 seconds, default 15.
If you join a race that's already under way, you get a status board instead of the matchups.
At the finish
- At the finish: show the rivals results after your celebration (the default), instead of your celebration, or not at all.
- Pause before rivals results: from 0 to 300 seconds, default 5. Raise it if the results board clashes with iRacing's own results screen.
- Results on screen for: from 5 to 180 seconds, default 20.
Status during the race
- Show a status board at half distance: on by default. In lap races it shows when the leader reaches half distance; in timed races, halfway through the clock.
- Also show one regularly (for long races): on by default, with Minutes between status boards from 5 to 240 (default 30).
- Status board on screen for: from 5 to 120 seconds, default 15.
The status board shows every drafted driver's start and current position, and your places gained or lost against the rivals. Boards are always at least 5 minutes apart and skip the last couple of laps. Test status board plays a sample.
Logo
The Grid Rivals logo appears on the boards and on the TEAMMATE and RIVAL banners.
- Logo: paste a web link to an image, or click Upload logo… to use a file from your PC. Use the default logo goes back to the Grid Rivals logo. The member list can also set the logo.
- Space around the logo: top, right, bottom and left, in pixels from −200 to 200. Positive numbers add space; negative numbers trim empty space built into the image. They're measured on the board's logo, which is 84 pixels tall, and scaled down for the small logo on banners.
Teams
Two panels show the teams from the member list, each in its team colour. Each panel shows:
- The team name and how many of its 20 places are filled.
- Streamer: a link to the team streamer's Twitch channel.
- Captain: with their photo.
- Colour: the team colour used on boards and banners.
- The drivers, with the captain marked 👑 and your own name marked you.
The teams come from the official list, so they can't be edited here.
Drivers in this session
This list shows everyone in your live iRacing session: car number, driver, class, iRating and licence. Grid Rivals drivers are marked with their team, captains with 👑, and your own row with you. It updates as drivers join and leave, so you can see before the start who's in your race.